SPRAY PLASTER

Polyurethane dispersion-based paint that creates a "cement" effect. Especially useful for adjusting cement coatings or finishes. Can be customized for various building surfaces: wood, cement, plastic.

PROPERTIES

• Color: white 

• Density at 20°C: 1.2

• Dries quickly 

• Can be used in conjunction with a stain blocker when preparing the surface before painting.

SPECIFICATIONS 

Composition

Binders: polyurethane dispersion 

Propellant: dimethyl ether

INSTRUCTIONS FOR USE

The surface must be clean, dry and free of grease. Remove all paint, varnish, rust, etc. residue, then sand. If you use the product outside, remove those on the surface moss or algae. Protect around existing items. Shake well before use. Spray av. 25 - 30 cm from the surface. The paint can be applied thinly or thickly layer depending on the required finish the need for work. Apply at temperatures between 10°C and 30°C. The viscosity of the paint varies depending on temperature, and the texture may thicken at below 10°C.